• Desktop cabinets
• Wall mount equipment cabinets
• Vented Datacom Equipment Cabinets
• General Purpose Cabinets
• Configure Your Own Cabinets
• Knockdown Cabinets
• Shelves
• Cable Managers
• Screws and hardware

• Hammond Racks
• Hammond Power Strips
• Premise Wiring Products
• UPS power supplies

Perfect for small office, test bench, or workgroup applications. Fits standard 19 inch rackmount equipment like patch panels, switches, hubs and PDUs. Available in three depths.

• Heavy duty, 16-gauge steel, 19” table top cabinet.
• Ventilated sides to allow natural air convection.
• Includes two pairs of adjustable rails, rubber feet, black plastic handles, clip nuts & screws.
• Ships unassembled (four cabinet pieces & four rails) in a flat pack container.
• Overall width 21”. Overall height 2” over panel space.
• Front & back lip is .585" so usable depth is reduced by 1.17"
• Recommended maximum weight 800 pounds.
• Rugged textured black powder paint finish.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Perfect for SOHO (Small Office, Home Office) applications for servers, storage & networking. Supplied unassembled (four cabinet pieces & four rails), requires only a screwdriver to assemble. Optional perforated doors, fans, casters, and stacking/ganging kits available. Available in three depths and 12U or 24 heights.

• Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
• Shipped in a flat pack container for handling ease & protection.
• Heavy duty, 16-gauge steel, 19” rack mount cabinet.
• 12U version is 25" high (fits under most desks).
• Easily stacks and/or gangs to other units.
• Includes two pairs of adjustable square hole rails, and 50 screws and cage nuts
• Overall width of 24” provides space for cabling.
• Generous cable-entry "punch-outs" with gasket.
• Front & back lip is .75" so usable depth is reduced by 1.5"
• Recommended maximum weight - 1,500 pounds.
• Rugged textured black powder paint finish.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Ideal for protecting workgroup equipment like switches, hubs and patch panels. Available in four heights.

• Economic design - 19” wall mount rack cabinet.
• Ventilated slots front & side.
• Pre-punched top with cover plates for optional fans.
• Cable access panels top & bottom.
• Includes two pairs of square hole mounting rails with 20 screws and cage nuts.
• Locking tempered glass door opens a full 180 degrees.
• Ships unassembled in a flat pack container.
• Overall height - add 3/8" for mounting hardware .
• Maximum static load weight - 130 pounds.
• Rugged black powder paint finish.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Ideal for protecting workgroup equipment like switches, hubs and patch panels. Swingout design allows rear access to equipment. Available in five heights.

• Economic design swingout wall mount - 19” cabinet.
• Ventilated slots front & side.
• Body is hinged from wall mount section - 3.9" (100 mm) depth
• Pre-punched top for optional fans.
• Cable access panels top & bottom.
• Removable side panels.
• Includes 2 pairs of square hole mounting rails with 20 screws and cage nuts
• Smoked tempered glass door with lock opens a full 180 degrees and can be hinged either side.
• Shipped assembled - ready to install.
• Maximum static load weight - 130 pounds.
• Rugged black powder paint finish.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Ideal for protecting workgroup equipment like switches, hubs and patch panels. Swingout design allows rear access to equipment. Available in three heights and two depths.

• Standard 19” rack panel width mounting
  
• 3 hinged sections with quick release latches
  
• Includes one pair of infinitely adjustable - combination rack mount rails, on E.I.A. universal spacing (5/8 - 5/8 - 1/2 inch) drilled & tapped for 10-32 screws
  
• Choice of two depths - 11 or 20 inch deep center section (17.5 or 26.5 overall)
  
• Ventilated center section
  
• Lockable, smoked plexi front door (reversible by moving three hinges on enclosure)
  
• Lockable rear wall mount section with keyhole mounts
  
• Cable access knockouts top and bottom
  
• Heavy duty construction, 14 gauge steel
  
• 100 lb. weight load capacity
  
• Powder paint textured black finish.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

The DC200 is an economical enclosure with advanced cooling and security features for server, network and data storage applications. DC200 cabinets are available in 42U and 24U heights. A standard outside width of 23.6” allows cabinets to side or bay together matching standard 2’ floor tile placement, optimizing sub-floor cable and cold-air access. Cabinets have a total depth of 43.3” to provide support for deep server dimensions while allowing for cable management.

• EIA-310-D compliant
  
• Available in two heights: 42U (80.88" overall) or 24U (51.63" overall)
  
• 43.3” overall depth by 23.6” overall width
  
• Includes 4x 19” universal square-hole mounting rails
  
• Enhanced locking door handles
  
• Front perforated door w/ over 65% airflow
  
• Split rear perforated "barn" doors w/ over 65% airflow
  
• Top has 2 round cable egress (cw/solid filler panels)
  
• Open bottom allows cable and air access via floor
• Removable rear plate for floor-level cable entry
  
• Black textured (powder) paint
  
• Includes a pair of solid removable side panels
  
• 4 x leveling feet and casters included
  
• Ships on standard pallet

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

The DC100 series is premium quality cabinet designed for server, network and data storage applications, and features cooling performance and enhanced security. The DC100 is available in 42U or 24U sizes, with a standard outside width of 24” to allow cabinets to bay together and to match standard 2’ floor tiles. A depth of 42” accommodates deep servers and cable management.

• includes two pairs of universal 19 inch square hole mounting rails with cage nuts and screws
• 2000lb load capacity
• locking perforated front door, and perforated split rear doors with 65% airflow for convection cooling
• includes vertical cable manager, leveling feet and recessed heavy-duty casters
• includes removable vented top panel (42U) or solid top panel (24U) with cable access
• removable rear gland plate for floor-level cable entry
• open bottom to allow access through raised tile floor
• ships on a standard pallet, 42U model rolls through standard 7ft door

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Hammond's Contempra 2 cabinets are available in popular Rapid Rack configurations which come complete with frame, rails, sides, doors, top and leveling feet. Choose from two widths, three depths and heights from 24U to 45U.

Below are just our most popular configurations. Contempra 2 can also be ordered a la carte in any configuration you require. Please download the full Hammond cabinet catalogue for full options on the following:

• frames: 19 or 24 panel width, 24 or 28 outside width, heights to 49U, depths to 36 inches
• solid, louvered, plexiglass and perforated doors
• side panels
• solid, vented, raised, and cable entry tops
• tapped and square hole rails
• fan tops, blowers and fan trays

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Contempra 2 cabinets can be ordered a la carte in any configuration you require.

• frames: 19 or 24 panel width, 24 or 28 outside width, heights 20U to 45U, depths 23 to 36 inches
• tapped or square hole rails
• side panels
• solid, louvered, plexiglass and perforated doors
• solid, vented, raised, and cable entry tops
• fan tops, blowers and fan trays

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Choose tapped rails for easy mounting of patch panels, switches, shelves and other panel mount equipment. Choose square hole rails with cage nuts for rackmount servers and for universal compatibility. We recommend ordering two pairs of rails per cabinet.

• 12 gauge steel, zinc plated, EIA spacing

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Solid side panels made of 16 gauge steel with 1/4 turn fasteners. Sold in pairs.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Choose from solid, louvered, smoked plexiglass, perforated or plexiglass with a vented frame.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Available tops include solid, ventilated (with optional cable access) raised (for dust and sprinkler protection, or with integral 10 inch 550 CFM fan or four 4-inch fans (not shown.)

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Hammond's REFK knockdown cabinets go where other cabinets can't -- up narrow stairwells, around tight corners, into small elevators, and in small vehicles. Each cabinet includes top, bottom and sides broken down into a flat pack for easy shipping and handling. Available in black or beige. Front and rear doors sold separately.

• Standard 19” panel width (21.34” overall width)
  
• Choice of three available depths: 17.5”, 24.5” or 31.5”
• Shipped in a flat pack container for easy handling
  
• Heavy duty 16-gauge solid steel top, bottom and sides
  
• Four heavy duty, 10-gauge, zinc plated steel #10-32 vertical combination rails adjustable (front to back)
  
• Simple assembly using one bolt in each corner
  
• Removable gland plate on rear bottom
  
• Levelling feet and all hardware included
  
• Recommended maximum weight 1,000 pounds

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Perfect for monitors, modems, keyboards and other equipment that lacks 19 inch mounting brackets. We prefer the adjustable shelves as they fit any rack and work with both tapped rails and square hole rails. Note that RF and RS series shelves will require CPRSA adapters for use with square hole rails (see rails section above.)

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Organize power and data cables inside your cabinet. Choose the low profile manager for narrow cabinets.

For more cable management options see our racks page.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Perfect for organizing cables in racks, cabinets or wall brackets. Various models and sizes available. Fits all standard racks and cabinets having 19 inch mounting rails.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

• Clip nuts for round hole rails on wall brackets
• #12-24 for aluminum racks
• #10-32 for steel racks
• Use cup washers with countersunk screws

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

Casters make it easy to position your cabinet for easy access to installed equipment.

MSRP Pricing | Dealer Pricing (login)
Click here to request additional information or assistance

TopCopyright 2008, Lex Tec Inc.
160 Don Park Road, Unit 4
Markham, Ontario, L3R 1C3 Canada

Call us for molded cables, custom cables and wire harness assemblies!
Toronto 905-475-9979
Toll-free Canada and USA 1-800-665-9619